Alberta
InspectionDay for Alberta meat facilities
Run daily operational checks, record issues, document corrective action, and keep inspection records organized in one place.
Designed for provincially regulated Alberta meat operations.
60 days at no costFounder-led setupNo credit card or automatic billingNo obligation to continue
Example · Ontario Meat
Today
Operating day preview
Pre-operational inspection
Complete
Production controls
12 of 14 recorded
2 still required
Needs attention · 2
- Cooler 2 reading outside configured limit
- Corrective action due today
Verification
1 waiting
Daily records should not depend on binders, spreadsheets, and memory.
When records are split across paper, spreadsheets, shared drives, and separate forms, follow-up becomes harder and inspection requests take longer.
Before production
Pre-operational inspection
Start the operating day with the plant's pre-op record in one place.
During production
Plant-defined controls
Record readings and observations against limits the plant configured.
When something needs attention
Correction + corrective action
Keep the issue, response, assignment, and due date connected.
When records are requested
Find the right record
Search by date, area, deviation, or correction instead of separate folders.
When a record is requested, find it.
Search by date, record type, area, equipment, deviation, or correction instead of searching through separate folders and binders.
Example request
Show me Cooler 2 temperature records for a date range.
Records stay connected to corrections, corrective actions, verification, and evidence.
Example
Records
Cooler 2 temperature · date range
Day 3
3.8°C
J. Martin
Recorded
Day 2
4.0°C
A. Chen
Recorded
Day 1
4.1°C
J. Martin
Corrected
31 records · 1 correction · 2 deviations
From search to evidence package
Example evidence request
Refrigeration records
Inspector Evidence Package
- 31 records
- 2 corrections
- 1 corrective action
- 3 evidence files
View evidence package →
One record. One history.
When something changes, InspectionDay keeps the original record and connects everything that happens afterward.
Record
Capture what happened.
Needs attention
Flag a result outside the plant's configured limit.
Corrective action
Record what must happen next.
Verification
Keep completion and verification separate.
Evidence
Keep supporting evidence with the history.
Correct a record without rewriting history.
Submitted operational records remain preserved. If a correction is required, InspectionDay keeps both the original value and the correction.
Original submission
41°C
Recorded 10:42 AM
Correction
4.1°C
Corrected 10:47 AM
Decimal entered incorrectly
Reason · author · timestamp preserved
Keep the issue and the follow-up together.
The originating record, immediate response, corrective action, verification, and evidence stay in one connected history.
InspectionDay does not determine whether a corrective action satisfies Alberta requirements.
Cooler 2
6.8°C
Needs attention
6.8°C reading outside configured limit
Immediate response recorded
Product moved and unit checked
Corrective action
Assigned to J. Martin · Due Aug 12
Verification
Pending
Evidence
2 files
Built for daily work on the plant floor.
Configure areas, equipment, operational checks, and staff roles around how your Alberta facility actually runs.
Configure areas, equipment, operational checks, and staff roles around how your Alberta facility actually runs.
Today and Floor
Operating-day dashboard and mobile floor workflow for checks, attention, and verification.
Pre-op and process controls
Daily pre-operational inspections and plant-defined readings, limits, and frequencies.
Premises and equipment
Areas, equipment, and observation history connected to daily records.
Staff roles
Invite operators and QA staff with role-based access to record, review, and verify.
Evidence
Photos and attachments stay connected to the record history.
Corrective actions
Assign, track, and connect follow-up to the source record.
Verification
Separate completion from verified close-out.
Records and retrieval
Search plant records and assemble inspector evidence packages when records are requested.
Abattoir controls
Manufacturing and sanitation controls configured for Alberta abattoir profiles.
Self-service setup
Configure plant profile, premises, controls, and staff without a custom implementation project.
Alberta facility profiles
Product maturity differs by profile. InspectionDay describes each configuration factually rather than implying every facility type has the same field validation.
Red meat abattoir
Daily Floor workflow, operational checks, corrective actions, and records for provincially regulated red meat abattoirs.
Available configuration
Poultry abattoir
Poultry-oriented configuration is supported in the product. Field validation is still in progress.
Configuration supported, field validation pending
Mobile butcher facility
Mobile facility configuration is supported in the product. Field validation is still in progress.
Configuration supported, field validation pending
Built around Alberta's meat inspection framework.
Mapped to verified Alberta regulatory sources, not a regulation count or completeness claim.
Meat Inspection Act
Provincial framework for Alberta meat facility inspection.
View Alberta source (opens in new tab)Meat Inspection Regulation (AR 42/2003)
Operational requirements for provincially regulated Alberta meat facilities.
View Alberta source (opens in new tab)Meat Facility Standards, 2022
Facility standards referenced in Alberta meat inspection programs.
View Alberta source (opens in new tab)Program guidance for slaughter and meat processing
Alberta guidance for operational programs at slaughter and processing facilities.
View Alberta source (opens in new tab)
InspectionDay records plant activity and supports inspection readiness. It does not determine regulatory compliance or replace Alberta government oversight.
Federally licensed CFIA establishments are not supported in the current Alberta Meat release.
Alberta operational guides
Source-grounded explanations for managers and QA leads — useful even if you never become a customer.
Common questions
- What is InspectionDay for Alberta?
- InspectionDay is software for daily operational checks, corrective action, and inspection record retrieval at provincially regulated Alberta meat facilities.
- Who is it for?
- Provincially regulated Alberta meat operations: plant managers, QA leads, and operators who need daily records, corrections, and retrieval connected in one place.
- Does InspectionDay determine compliance?
- No. InspectionDay records and organizes plant information. Regulatory determinations remain with the applicable authority.
- Which Alberta facility types are supported?
- Red meat abattoir is the strongest current configuration. Poultry abattoir and mobile butcher facility profiles are supported in configuration, with field validation still in progress.
- Is InspectionDay government software?
- No. InspectionDay is independent software and is not affiliated with or endorsed by the Government of Alberta.
Alberta pilot program
Pilot InspectionDay in your Alberta facility.
We are looking for a small number of provincially regulated Alberta meat operations to join a 60-day founder-led pilot.
- 60 days at no cost
- Founder-led setup
- No credit card or automatic billing
- No obligation to continue
If InspectionDay is useful and you choose to continue, founding pilot plants receive preferred first-year pricing.
Sign in